Men’s Spearfishing Wetsuit Outside-Lined

The Spearfishing Wetsuit Outside-Lined is the result of three years of development alongside experienced spearos—built for the way they actually dive: tracking, waiting, and moving fast when it counts. Elastic JAKO neoprene gives you the freedom to shift positions without fighting your gear, an open cell interior holds warmth through longer sessions, and Supertex-reinforced elbows and knees takes on the wear-and-tear that comes with the territory. The design features our own unique camo print and an embroidered chest pad logo for a clean, purpose-built look. Made for cooler waters: 21–25°C (70–77°F).

Wetsuit tops and pants can be purchased in separate sizes.

Please note: Open cell wetsuits must be put on in water or with lubricant.

Flexible
Extra-stretchy JAKO neoprene moves with you, whether you're repositioning on the reef, pulling back a band, or kicking hard after a shot.

Durable
Nylon-based Supertex reinforces the elbows, knees, and chest where wetsuits take the most abuse. The beavertail's wider Velcro closure with box-X stitching holds up through repeated use without shifting or wearing out.

Warm
Glued and blind-stitched (GBS) seams bond each panel without fully penetrating the neoprene, reducing water circulation, while 5mm open cell neoprene clings directly to your skin, keeping your body heat where it belongs. An extended high-waist design reaches further up the torso than standard wetsuit pants, adding an additional layer of warmth across the core.

Cut with purpose
Reduced-thickness 3mm neoprene around the hood, armpits, and core keeps you moving freely during the hunt, while a raw cut on the face seal and wrist cuffs maintains a tight seal against water entry.

Details and Materials

• Material (total thickness): 5mm limestone-based JAKO neoprene + ultra-stretch JY fabric exterior
• Two-piece wetsuit: Classic hooded jacket with velcro beavertail fastening and extended high-waist pants
• Elastic fabric exterior for flexibility, damage-resistance, and better protection against damaging UV rays
• Glued and blind-stitched (GBS) seams for a watertight seal, improved heat retention, and increased durability compared to standard flatlock seams
• 5mm chest pad for secure, slip-resistant reloading
• Supertex-reinforced elbow and knee pads for abrasion resistance in key areas
• 3mm inserts in the hood seal, armpits, and core for added flexibility and comfort without compromising warmth
• Wide Velcro beavertail with box-X stitching to evenly distribute stress across the fastening area, protecting against degradation over repeated use
• Recommended for 21–25°C (70–77°F) water, depending on time in water and personal sensitivity to cold

Technical Specifications

• Weight: 1.14 - 1.4kg (2.4 - 3.1lb)
• Wetsuit Color: Teal Camo
• Wetsuit Sizes: XS, S, M, ML, L, XL, XXL (mix and match top and bottom sizes)

Care Instructions

• Before putting on your wetsuit, ensure your skin is completely dry—no water droplets or sweat. Wet skin causes the inner fabric to stick, making the wetsuit difficult to put on and potentially causing tears.
• You must thoroughly rinse your wetsuit in fresh water directly after every dive. If you do not have a chance to do so, leave your wetsuit in a bag with some seawater. Do not let salt water dry on your wetsuit and do not machine wash.
• After rinsing in fresh water, allow your wetsuit to air dry. Do not dry your wetsuit in the sun, near a fire, near central heating systems, or in a clothes dryer.
• From time to time, you should wash your wetsuit with a wetsuit-specific shampoo. Follow directions closely. Remove grease, oil, and other stains using a wetsuit-specific degreaser. Never use petroleum products on your wetsuit.
• Store your dry wetsuit in a cool, dry place and avoid folding it for excessive periods. Folding a wetsuit for short-term transport is acceptable; otherwise, we recommend laying it flat or hanging it on a hanger that does not stretch out the wetsuit. Avoid storing it in direct sunlight.
• If you tear your wetsuit, use Neoprene Cement to repair it, which is commercially available at most diving centers or watersports stores. Follow the instructions carefully. Never sew smooth skin seams. Fabric-finished surfaces can be loop stitched, but avoid stitching completely through to the opposite surface. If you have doubts about repairing your wetsuit, contact us by email at [email protected]—we'll happily assist you.

See the full list of product care instructions.

Warranty Policy

A 2-year limited warranty applies. Please note that defects or damage to the equipment caused by improper or incorrect use or insufficient/improper maintenance and product care will render our warranty policy null and void..

Production Times

Wetsuits currently in stock ship within 2–5 business days. Delivery time depends on your shipping method and location. If your wetsuit is out of stock, we’ll contact you by email to inform you of possible delays. If you order this product along with another product that has a longer production time, your entire order will be shipped together once all items are ready.

Shipping and Returns

See the Shipping and Returns section of the FAQ.